|
|
|
|
|
FOUNTEK
NeoCD3.0 RIBBON TWEETERS - SOLD IN PAIRS
110mm ROUND AUDIOPHILE TWEETER PAIR
NeoCD3.0 ribbon tweeter is a
high-performance component which is
probably the best choice for building or
upgrading your HiFi loudspeaker system.
With a ;little crossover construction
experience you can experience an
incredible enhancement to your
listening.
Thjis tweeter features:
A Super strong Neodymium magnet for very
high efficiency.
Build-in impedance conversion
transformer with ruler flat linear
response.
Effective from 1.4KHz upwards due to the
relatively low self-resonance.
Large area and very thin,
Enforced-Sandwich Ribbon Diaphragm
guarantees a high degree of signal
fidelity, efficiency and a broad
frequency response.
Low distortion factor, good
power-handling capabilities, high linear
impedance and linear amplitude frequency
response to the infrasonic.
Broad frequency response range and FLAT
impedance from 1KHz to 40KHz.
6mm thick, metal faced, black anodised,
wide dispersion 110mm face plate.
Foam backed for mounting grommet. Fully
shielded for TV proximity.
Many advantages of this driver give it a
wide application.
The Manufacturers Recommended Crossover
Frequency is to be no lower than 2.5KHz
/ 2nd-Order for rated power.
The wide bandwidth affords this ribbon
tweeter to be quite suitable for two-way
speakers systems.
High efficiency makes this tweeter
suitable for multi-array speaker systems
and also ideal for low power setups. The
NeoCD30 sounds just beautiful with the
A3500-SS of 35 Watts giving ample
volume.
A higher crossover frequency will yield
better power handling.
so the NeoCD30 can be inserted into more
powerful multi-way setups as a high
range "Super Tweeter".
Requiring high power? Then see also our
NeoPRO 5i
For shimmering highs with incredible
detail that will compliment any system..
Please consider the NeoCD30.
|
Super strong Neodymium magnet
for high efficiency |
|
Build-in impedance conversion
transformer |
|
Effective from 1,400Hz upwards
due to the large diaphragm area
and low self-resonance. |
|
Thin enforced sandwich ribbon
diaphragm guarantees a high
degree of signal fidelity and
broad frequency response.
|
|
Low distortion factor, good
power-handling capabilities,
high linear impedance and
amplitude frequency response and
the broad frequency response
range. |
|
Flat impedance from 1,000 to
40,000Hz |
|
Stones
Sound Studio Recommend above
5KHz with a 3rd-Order crossover. |
Specifications
|
Ribbon material |
Enforced sandwich |
Ribbon mass |
18mg |
Ribbon dimension |
8mmX60mmX0.02mm |
Ribbon area |
480square millimeters |
Gap flux |
0.6 Tesla |
Gap height |
3mm |
Impedance |
7Ohm |
DCR |
0.02 ohm |
Sensitivity |
95dB/M/W |
Frequency response |
1,400~40,000Hz |
Resonance
frequency |
400Hz
|
Power handling |
17W Normal, 40W Max |
Recommended crossover frequency |
2,500Hz / 2nd-Order |
|
|
|
|
|
|